SECTION 2 – DEFINITIONS

SECTION คำชี้แจง
- ถ้าไม่กรอกทั้งชื่อ และนามสกุลของผู้ทำข้อสอบ ระบบจะไม่ตรวจข้อสอบให้
- ส่วนนี้จะไม่มีการบันทึกผลสอบ หากต้องการบันทึกโปรดสมัครสมาชิก
- ถ้าทำข้อสอบไม่ครบ ระบบจะไม่ตรวจข้อสอบให้
- ผู้ทำข้อสอบจะมีเวลาในการทำข้อสอบเพียง 30 นาที หากเกินเวลา ระบบจะไม่ตรวจข้อสอบให้
- เกณฑ์ตัดสินผ่านการทดสอบอยู่ที่ร้อยละ 90 หรือ 4.5 ข้อขึ้นไป
ส่วนนี้จะไม่มีการบันทึกผลสอบ และแสดงเฉลยแบบทดสอบ หากต้องการบันทึก และรายงานการทำแบบทดสอบ โปรดสมัครสมาชิก 
1. 2.28 What term describes a vessel with the forward draft greater than the aft draft?
    a. Down by the stern
    b. Trimmed by the head
    c. Up at the bow
    d. Listing dangerously
2. 2.27 What is the Reference Gauge Height of a tank?
    a. The distance from the tank top to the tank bottom
    b. The distance from the ullage hatch to the datum plate
    c. The distance from reference gauge point to the tank bottom or datum plate
    d. The distance from tank bottom to the ullage hatch
3. 2.16 What is Gross Observed Volume (GOV)?
    a. The total measured volume of all petroleum liquids, sediment and water, and free water at observed temperature
    b. The total volume of all petroleum liquids and sediment and water, excluding free water, at observed temperature
    c. The total volume of all petroleum liquids excluding sediment and water and free water, at observed temperature
    d. The total volume of all petroleum liquids and sediment and water, excluding free water, corrected to a standard temperature by the appropriate volume correction factor for the observed temperature and density
4. 2.41 What has the same meaning as the term innage?
    a. Ullage
    b. Sounding
    c. Outage
    d. Answers a., b. and c. are all wrong
5. 2.09 What is a datum plate?
    a. A level metal plate located directly under the reference gauge point to provide a fixed contact surface from which liquid depth measurement can be made.
    b. A metal plate located next to the gauging point on a tank indicating the reference gauge height.
    c. A metal plate located close to the gauging point on a tank listing all the relevant tank data
    d. A level metal plate located at the top of a gauge hatch on a tank from which the gauge height is measured.
ให้ตรวจสอบชื่อนามสกุลว่ากรอกครบหรือไหม่
พร้อมกับตรวจข้อสอบว่าเลือกทำครบทุกข้อหรือไม่ ไม่ครบไม่ตรวจนะครับ
แนะนำชุดข้อสอบ

1. แนวข้อสอบวิทยาศาสตร์ ประถมศึกษาปีที่ 4 ชุดที่ 1


2. แบบทดสอบหลังเรียน เรื่อง กีฬาแบดมินตัน


3. แบบทดสอบวิชาบาสเก็ตบอล


4. ข้อสอบ บรรจุครูผู้ช่วย วิชาเอก ปฐมวัย พร้อมเฉลย 50 ข้อ


นำแบบทดสอบไปติดที่เว็บของคุณ


EDUCATION RESEARCH | หน้าแรกข้อสอบ | เข้าระบบ | สมัครสมาชิก | สร้างข้อสอบ | แชร์ข้อสอบ
แนวข้อสอบบรรจุครูผู้ช่วย | TOEIC Online | IELTS Online | SAT | TOEIC | IELTS